VIDEO Instructions
VIDEO Instructions
WORKS FOR SPOONS, PLUGS, BODY BAITS, ANY DOWN RIGGING LURE ON THE MARKET
This release can be fixed at any depth on your main line by placing the line between the rubbers. To use as a cheater or slider, follow the steps below and don't place the line between the rubbers. Can be used as a cheater or slider or fixed at any depth.
Line Release Length 1-5/8 inches
Releases include a 75 pound Crane Swivel attached to the release.
INSTRUCTIONS
Step 1 Tie a 3-4 foot long line from the swivel to a snap swivel and lure as shown.
Step 2 Place the line in the release as shown in Fig 1 and then close as shown in Fig 2.
Step 3 Slide the rubbers towards the lure as shown in Fig 3 and place the fishing rod line between the rubbers.
Step 4 Rubbers must be in the position of Figure 2 in order to open the release.
Downrigging Release
Video Instruction
Line Release Adjustment VIDEO Instruction
Use a 3-4 foot lead to snap swivel and lure.
Use a 6 inch lead for casting.
This release can be fixed at any depth by placing the line between the rubbers.
Line Release Length 1-1/8 inches
Releases include a 30 pound Crane Swivel attached to the release.
INSTRUCTIONS
Step 1 Tie a 6-inch-long line from the swivel to a hook or lure.
Step 2 Place the line in the release as shown in Fig 1 and then close the release as shown in Fig 2.
Step 3 Slide the rubbers towards the lure as shown in Fig 3 and place the fishing rod line between the rubbers.
Step 4 Rubbers must be in the position of Figure 2 in order to open the release.
Casting-Flat Lining
(Dipsy-Diver)
Release Video Instruction
Line Release Adjustment VIDEO Instruction
This release can be fixed at any depth by placing the line between the rubbers as shown.
Line Release Length 3-3/4 inches
Releases include a 30 pound Crane Swivel attached to the release.
INSTRUCTIONS
Step 1 Tie a 3-inch-long line from the swivel to a hook or lure as shown.
Step 2 Place the line in the release as shown in Fig 1 and close the release as shown in Fig 2.
Step 3 Slide the rubbers towards the lure as shown in Fig 3 and place the fishing rod line between the rubbers.
Step 4 Rubbers must be in the position of Figure 2 in order to open the release.
Ice Fishing Release
Video Instruction
Line Release Adjustment
VIDEO instruction
WORKS FOR LARGE SPOONS, PLUGS, BODY BAITS
This release can be fixed at any depth on your main line or steel line, by placing the line between the rubbers as shown. Place multiple releases when bottom bouncing salt water fishing for big game fish.
Line Release Length 2-1/4 inches
INSTRUCTIONS
Step 1 Tie a line 3-4 foot long line from the loop to a snap swivel.
Step 2 Place the line in the release as shown in Fig 1 and then close as shown in Fig 2.
Step 3 Slide the rubbers towards the lure as shown in Fig 3 and place the fishing rod line between the rubbers.
Step 4 Rubbers must be in the position of Figure 2 in order to open the release.
Salt Water & Big Game
Release Video Instruction
Line Release Adjustment VIDEO Instruction
NEW! Swivel Dispensers & Retractable Dispensers
This refillable dispenser was designed to allow a fisherman to hold the dispenser while putting the line through the eyelet of the swivel at the bottom of the black tip of the Dispenser. Then by pulling downward, it releases the swivel from the dispenser, allowing the next eyelet to be exposed for use. Works great for trout fishing, tournaments and derbies!
Each dispenser contains approximately 10 swivels.
Container is refillable.
Swivel Dispensers Video Instruction
Crane Swivel
size 10
Color - black
Length - 3/8 inches
LB Test - 20
Contains 10 swivels
Retractable Dispenser
(Trout Fisherman's Friend)
size 1X with retractable
Contains 10 swivels
Retractable Dispenser
(Trout Fisherman's Friend)
size 3X with retractable
Contains 10 swivels
